Skoči na vsebino

Pomoc .. Help -- Rx3 rx5

Ustvari kratki URL


Priporočeno sporočilo

Napisano

Hi,

 

Sorry my slovenian is not too great. I understand most of it but have trouble writing it.

 

I have questions.

 

I am thinking with my family to move to slovenia from Australia. We are slovenian (potni list) citizens also. (we have family in prlekija)

 

I have 2 cars that i wish to take with me but unsure if i can register or drive these cars in slovenia.

 

Both are right hand drive, but one is build in 1972 RX3 and the other in 1976(oldtimer)

 

Because of the age can i drive these in slovenia without changing to left hand drive?

 

Also my cars produce some power (over 415hp at the wheels). Do i need to reduce to power as they are on low tune now for our crap 95 fuel. They are registered in Australia at the moment and pass our road safety laws (tehnicni pregled)

 

 

Can someone please give me advise as i REALLY want to bring these cars with me when we move to slovenia. I don't want to sell them or leave them here.

 

Any help would be greatful.

 

Thanks

Napisano

We already have some RHD cars in Slovenia (Nissan Sky R34 GTT, Supras, RX-7) Supras are registered in UK, Sky and RX-7 in Slovenia. About RHD and turbos is no problem, but with RX-3 and RX-5 as i know they where never sold here. Maybe could be posible as oldtimers.

 

Please don't leave them in Australia :bravo: I would love to see them in persone :bravo:

Napisano

post-5853-1270728978_thumb.jpgThanks,

 

I do intend to bring them with me (hopefully at least one of them rx3 preferably) if i can register at least one there. I won't drive them in winter of course but would love to drive them in summer and maybe take the rx3 to germany on the autobahn to see what she can do (hopefully surprise a few cars there or piss them off) It does use alot of petrol but sometimes it worth it (normal driving 20ltr/100km - Heavy driving don't ask)

 

As you said that the Rx3 was not sold there so maybe there is a chance under oldtimer? If i can't bring the rx5 that is fine as i don't really care about it as much.

 

Another question is that if you have E85 fuel there (15%bensin and 85% ethanol) Last time i was there i did not see it. With this fuel i can run more than 1 bar which should be nice.

 

Here is one of the engines.. The engine in the avatar is my brothers. Its a 26b.We build rotary engines as a hobby as we have an engineering business.

 

Thanks

Napisano

Also,

 

I think that you pay for insurance on KM (power) and registration on cc's? Is this right? I am not sure if they classify a 13b as a 1.3ltr or 2.6ltr there? Does anyone with rx7 know?

 

I know that you have tehnicni pregled every 6 months for older cars.. can i just get 6 months a year of registration or even club registration?

 

Also should i put a really dead motor in it to save on insurance? i was even thinking of taking heaps of timing out of the engine and make it run shit so that it will only make around 200hp? Is this wise?

 

Sorry about all the questions, but i am serious about bringing at least one car there (rx3) as its like another child to me.. (just joking but close)

 

Thanks

Napisano

Hi, thing's aren't that complicated here as far as oldtimers are concerned. Since both of your cars are older than 25 years they are concidered as oldtimers and the conditions for registration in Slovenia arent that tough. But i do advise that you say nothing about any modifications that you made (the oficials might give you trouble) as nobody has any idea how stock rx3, rx5 engine looks :P :ne vem:

oh, and road tax and insurance will be practicaly free as they are oldtimers ;) ( 90% off :bravo: )

Napisano

Hi, thing's aren't that complicated here as far as oldtimers are concerned. Since both of your cars are older than 25 years they are concidered as oldtimers and the conditions for registration in Slovenia arent that tough. But i do advise that you say nothing about any modifications that you made (the oficials might give you trouble) as nobody has any idea how stock rx3, rx5 engine looks :P :ne vem:

oh, and road tax and insurance will be practicaly free as they are oldtimers ;) ( 90% off :bravo: )

 

 

Thanks very much. 90% sounds good..

 

So keep my mouth shut when i get there...:)

 

I can put it back to standard in a day (with tools and parts) so its no big concern there as i will put them on a shipping container and fill it with spare parts. I don't think they would be upset with larger brakes and upgraded suspension ? (these old cars are dangerous with the brakes that they had in the 70's)

 

Well it looks good so far with tax and registration..

 

With insurance... can you nominate a value, as a rx3 here in good condition is valued at 35k.

 

Even though the car will not leave my sight for long, its good to know if some .............(fill in the dots) decides to steal it.

 

Thanks

Napisano

youre not even here yet and theyre telling you how to avoid the officials..

true balkan-spirit :)

 

btw, what "hit" you to leave oz for slo. ? :P

It's all fun and games 'til someone loses an eye, then it's just fun you can't see

Napisano

Thanks.

 

Will they dyno the car OR will they go off the original power?

 

I will be able to put the car back to standard but would prefer not too.

 

I will talk to my cousin and get him to call them for me.

 

Thanks for all your help.

 

 

I hate it here as we have speed camera's everywhere now (nice revenue for austalia) and limit is only 100. Makes no sense but we have large capacity engines and such a small speed limit.. On my 8klm trip to work i would say there is no less than 12 speed camera's. Lovely isn't it. Basically now every set of lights has a fixed speed camera here..

 

Just keep that in mind if anyone comes to australia..

Napisano

youre not even here yet and theyre telling you how to avoid the officials..

true balkan-spirit :)

 

 

 

btw, what "hit" you to leave oz for slo. ? :P

 

 

My wife was born there and has all her family there. Plus i have family there too.

 

I love the culture and spirit there of people.

 

 

 

 

A few rotor's from australia.

 

http://www.rotorg33k.com/videos/video/74-f...t-cracked-the-8

 

 

Hopefully soon i will break into th 9's..

Napisano

As stated in traffic licence, noone is Dynoing the car for technical inspection (that's for police :jupiii: )

 

But they will measure Co2...which in Europe is a bit strict

 

 

Well i know that these old rotaries were not too efficient, so i am not sure about Co2. I am hoping to run e85 there (if available) which will reduce Co2 considerably.

 

Now the car is fuel injected so i am guessing it is running cleaner than when it was new..

 

I am sure there will be some exceptions for oldtimers due to being old technology.

Napisano

Is your wifes name Alja maybe???????????

 

That's my friend that got married to Ozzie, lives now down under

 

 

Sorry No...

 

By e85 i mean (15% bensin and 85% ethanol) If there is a 100 ethanol even better... as i will be able to run over 1.5bar then and make 500-600hp at the wheels on a safe tune... (30 degree plus days)

 

But its too dangerous now with 400 odd so i will probably keep it at that and occasionly wind up the boost depending on how many lanes on the autocesta... It now will move into 2 or 3 lanes when pedal is down..

Napisano

E85 you mean that is mix of ethanol and gas, her we have only 100%gas no ethanol in it

95, 98 and 100 octane

 

 

Thanks.

 

I remember that, but just thought that you may have the e85 now. We are just starting to introduce it here and is limited to only a few petrol stations in each state.

 

Glad to see the LPG is taking off there too.. A lot of friends of mine are making very good power with LPG as it has a higher Octane than normal fuel and burns cooler. Have a friend thats making 560kw at the wheels in his car (approx 750hp) and drives it everyday.

Napisano

Glad to see the LPG is taking off there too.. A lot of friends of mine are making very good power with LPG as it has a higher Octane than normal fuel and burns cooler. Have a friend thats making 560kw at the wheels in his car (approx 750hp) and drives it everyday.

 

Awsome...It would be nice to see some pic of your cars :danzoman:

P.S. LPG is IN!

Sex, V6 and Rock 'N' Roll

Napisano

Keep in mind that if you register your car as old-timer (> 25yrs) first you must be an owner of another younger car. Otherwise the registration for your beast is 1000+ ? .

 

There is no problem if you register it for some months (i.e. may-sep).

 

Here you can calculate your expense:

cena registracije

 

As far as I know the demand is that a vehicle is completely original: colour, engine, etc. If modificated it can not be registered as an old-timer anymore.

regsitracija oldtimerja

Turbinca ma?inca, gremo na vinca!

  • 2 tedna kasneje...
Napisano

Pix, please! :notworth:

Turbinca ma?inca, gremo na vinca!

  • 4 let kasneje...
Napisano

OMG  its a rocket :P:rispekt:

20% mladih vidi svojo prihodnost zelo ro?nato-ostalih 80% pa nima denarja za nakup droge!!

attachmentzbg1.gif
FWD je za ?enske, RWD je za mo?ke, 4WD pa je za invalide

Pridružite se pogovoru

Objavljaš lahko sedaj in se registriraš pozneje. Če imaš račun, se lahko prijaviš, če želiš objavljati s svojim računom.

Gost
Odgovori na to sporočilo...

×   Prilepljeno kot obogateno besedilo.   Prilepi raje kot enostavno besedilo

  Only 75 emoji are allowed.

×   Vaša povezava je bila samodejno vdelana.   Namesto tega raje prikaži samo kot povezavo

×   Tvoje predhodno sporočilo je bilo obnovljeno.   Izbriši besedilo iz urejevalnika

×   You cannot paste images directly. Upload or insert images from URL.

Nalagam...
  • Zadnja sporočila

    • Res je. Drago je doktoriral na temo "Kaj vpliva na zvitost plastike na mojem avtu". Imamo pa še par kandidatov za doktorat na temo "moja CX 30 je navadna limonada".
    • EDIT   Kar je google ven opljunil (samo ena slika!!!) očitno obstaja,a ne vem,če je bil pri nas kdaj ponujen Parkside 3x360° laser...in to na parkside baterije (rabiš še baterijo in polnilec)....cena 80€! Drugače,kar sem našel so samo "navadni" križni (ne 360°) ali pa največ 2x360°.
    • Saj...vsak ima zase prav. Jaz zase vem,da brez tega...ma ne bom rekel,da "ne gre",ker večino mansarde sem naredil brez...ma vseeno npr. za puščene strope še preden je tlak izravnan rabiš "šlaufvago", za predelne in ostale stene itd...ja vse se da,a enkrat,ko probaš z tem...ma je razlika kot dan in noč....bom kar rekel "ne gre"....oz. za tak cvenk "bi bil butelj". Zmeraj je kak problem...al razdalja,al si sam itd...zmeraj nek problem,ki ga moraš po ovinkih rešiti. Pa če pogledam le stroškovno-koliko stane npr. 3-4 m vaservaga...koliko stane kvalitetna vrvica za označevanje,koliko stane "šlaufvaga" (in je običajno še brez cevi) itd.....   Bom omenil samo privatnika,ki mi je delal tlakovce,izolacijo,plato za vrtno hiško itd. (sem vse že tukaj predstavil)...ko so pripravljali šolungo za plato,in je prinesel kufer z rotacijskim laserjem...res profi za gradbince neka huda firma...SOLA al nekaj takega...je rekel da stane kot en avto😲...je rekel,da brez tega ne gre...je rekel,da nima toliko denarja,da bi si lahko privoščil delati brez...ne iz časovnih,in ne stroškovnih razlogov...enkrat zajebe plato in ima strošek not...ma je brez veze debatirati.   Za "civilne" namene pa za tak cvenk ni alternative. Ajd,saj lahko brez...tudi brez ata lahko...vzames kolo ali peš,pa gre...sam je malo razlika.... Mi je en sodelavec rekel...k ima Bosch 1x360° laser...takrat še za cca.130€...ko sem mu omenil,je rekel "samo vzami in ne premišljevati"....je rekel,da je to ena najboljsih orodij,kar jih ima...in res je. Šele ko imaš,vidiš,kaj ti vse olajša in prišpara čas,jezo itd...in na koncu je sigurno precizno.   Za to sem pa tudi objavil takš ne slike,da se vidi...ravnost zidov,vogalov,elementov itd... In...ni brez razloga,za kaj sem sel v nakup dodatne baterije...3x lahko ugibaš za kaj....sigurno ne za to,ker je skoz pospravljen v kufru...     Možno pred kratkim...mogoče,a dvomim...mogoče 1x ali 2x360° ....vsaj jaz se ne spomnim,da bi kdaj imeli 3x360° verzijo🤔...in toliko dodatnega pribora...rotacijski tripod,rotacijski nivelirni magnetni nosilec (izjemno koristen za suhomontažo) itd...možno,a dvomim...za tak cvenk pa sploh ne.
    • Mene osebno ne motijo. Pa prečke grejo dosti lažje gor.   Tiste krive plastike pa tak samo Drago vidi. Ostali ste rabli lupo.
    • Sanke na strehi so zakon.Sploh ne bi kupil karavana,da jih ne bi imel gor.
×
×
  • Ustvari novo...

Pomembna informacija

Spletna stran uporablja piškotke z namenom zagotavljanja funkcionalnosti in boljše uporabniške izkušnje spletnega mesta. Z uporabo spletnega mesta soglašate z uporabo piškotkov.