Skoči na vsebino

Priporočeno sporočilo

Napisano

Pozdravljeni imam mazdo 6 l2005 po menjavi sprednjih ?arnic sem opazil da imam v lu?eh prosto mesto verjetno je za meglenko, zanima me kje se da dobiti ali ?e ima kdo ta nastavek za lu? + stikalo za v?ig ker trenuto imam samo pokrove gor. Aja pa ?arnica je H1 sode? po konnektoru :)

Napisano

meglenka je H3

dobis na servisu rocko in vse drugo :)

mogoce dobis kako rabljeno bolha ali e-bay

It's all fun and games 'til someone loses an eye, then it's just fun you can't see

Napisano

Pozdravljeni imam mazdo 6 l2005 po menjavi sprednjih ?arnic sem opazil da imam v lu?eh prosto mesto verjetno je za meglenko, zanima me kje se da dobiti ali ?e ima kdo ta nastavek za lu? + stikalo za v?ig ker trenuto imam samo pokrove gor. Aja pa ?arnica je H1 sode? po konnektoru :)

 

 

kaj je cvijo zgleda da prevec saras po mazdi?

 

kdaj bova naredila midva en mazda meet v kranju? prit kj naokoli..ajde

www.trziskisladoled.si

Pridružite se pogovoru

Objavljaš lahko sedaj in se registriraš pozneje. Če imaš račun, se lahko prijaviš, če želiš objavljati s svojim računom.

Gost
Odgovori na to sporočilo...

×   Prilepljeno kot obogateno besedilo.   Prilepi raje kot enostavno besedilo

  Only 75 emoji are allowed.

×   Vaša povezava je bila samodejno vdelana.   Namesto tega raje prikaži samo kot povezavo

×   Tvoje predhodno sporočilo je bilo obnovljeno.   Izbriši besedilo iz urejevalnika

×   You cannot paste images directly. Upload or insert images from URL.

Nalagam...
  • Zadnja sporočila

    • Zato 😁   Spark-plug length varies because different engines and cylinder-head designs require different physical reach, heat management, and sealing characteristics. “Length” usually refers to the threaded portion (reach) and the insulator nose length; both affect fit, combustion and cooling. Key reasons and effects Reach (threaded length) Provides proper spark location relative to the piston and combustion chamber. Correct reach positions the electrode in the optimal combustion zone for flame propagation and avoids impact with valves or piston crowns. Ensures correct sealing with the cylinder head and engagement with the thread depth specified by the manufacturer. Wrong reach can cause exhaust leaks (too short) or physical contact/damage (too long). Insulator nose length (projecting ceramic) Influences heat dissipation and quenching. A longer nose projects further into the combustion chamber and changes the thermal profile of the plug. Changes likelihood of pre-ignition or fouling. Too-hot plugs (insufficient heat-sinking) can cause pre-ignition; too-cold plugs (excessive heat-sinking) foul with deposits. Manufacturers pair nose length with a heat-range rating to manage this. Electrode position and combustion dynamics Electrode location relative to the center of the chamber and incoming fuel/air jet affects ignition quality and flame kernel growth. Some engines (high-compression, direct-injection, or specific combustion-chamber shapes) require one configuration to optimize burn and emissions. Mechanical and service considerations Extended reach may be required for recessed or deep combustion chambers; short reach for shallow or pent-roof heads. Aftermarket performance plugs sometimes use different lengths to accommodate custom heads, turbochargers, or nitrous setups, but proper fitment is critical.
    • Boljsa eksplozija, boljse izgorevanje. Kar pomeni malenkost boljsa odzivnost in malo manjsa poraba.   
    • Bemtiš, navoja ima pa, ko da vžiga v karterju...   Jah, ki čm, kmet an s hribu doma, pei nism še vidu deuge svečke kt une od motorke...
    • Zdajle počasi pijem enega brezalkoholnega, po 2h odbojke
  • Kdo je trenutno prisoten (Poglej celoten seznam)

×
×
  • Ustvari novo...

Pomembna informacija

Spletna stran uporablja piškotke z namenom zagotavljanja funkcionalnosti in boljše uporabniške izkušnje spletnega mesta. Z uporabo spletnega mesta soglašate z uporabo piškotkov.