Programiranje daljinca mazda 6 2004 letnik

[BOBI]

kolegu ne dela vec daljinsko,ve kdo postopek kako se na novo sprogramira kljuc vrstni red postopka

[KAALman]

http://forum.mazda6club.com/1992602-post4.html

 

2003-04 Mazda 6 REMOTE PROGRAMMING

 

 

Step 1: Open drivers door and leave open.

 

Step 2: Lock and unlock the driver’s door using the power door lock switch on the door.

 

Step 3: Insert key into the ignition.

 

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

 

Step 5: Open and close the driver’s door 3 times. (Door should be left open after this step).

 

Step 6: ECU should respond by locking and unlocking the doors.

 

Step 7: Press any button on remote #1 twice. ECU responds by locking and unlocking the car doors.

 

Step 8: Press any button on remote #2 (etc.) twice. Each time the ECU will respond by locking & unlocking the doors.

 

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks. You're done!

[BOBI]

popravek zamenjo se je racunalnik,ki ma prek to zaklepanje in notranjo rasvetljavo,vse crknlo sedaj pa spet vse dela razen daljinskega zaklepanja ima kdo idejo kaj storit :ne vem: :ne vem: